Rt500 Annealing / Thermal Processing Kiln (R6559)

Technical Specifications
Industries Used in
Heat treatment, annealing
Internal dimensions: d90 x w60 x h90cm - 486dm³ usable internal volume. -Weight: 980 Kg -Power: 20 KW -Max. temperature 1200°C.
Voltage: 400V -Door: opens to the right. -Oven type: Chamber type.
Upper ventilation chimney system, at least 20*20*5 cm. stainless chrome material.
Inside of the chimney at least 15 mm. coordiniorite material.
At least 3.5 cm. gap for a snug fit inside the cover.
When the oven door part is closed, the entire surface it presses is made of hard brick material with a density of 480 Kg / m3.
Insulation content: European JM 26 Thermal Ceramics European brick with 1430°C resistance, Thermal Ceramics board plate with 1260°C resistance, X800 Board with 800°C resistance.
The base of the furnace is made of Alumina brick material to handle the load to be placed on me.
Brick system inside the furnace without mortar and with special interlocking system to minimize expansion and contraction during laying and to prevent cracking.
300 kg/m3 Bord material with a thickness of at least 50 mm behind the brick.
Furnace side sheets and insulation material separate (no decay thanks to the gap between them)
Interior and exterior surfaces are powder coated and completely resistant to decay
KANTHAL A1 heating elements with 1400°C resistance, evenly spaced to ensure homogeneous heat distribution.
Oven base level is at a suitable height from the floor for ease of operation.
Electrical control elements Telemecanique.
The control panel on the oven and the oven electrical connections are protected.
At the rear connection outlet, the wires will be double removed and there will be no breakage due to heat.
Rear connection outlets will be enclosed in heat resistant electroporcelain material and chassis will be prevented.
At the rear connections (between resistance - contactor), absolutely at least 180 C resistant fireproof cable.
Chromium plated connection mechanism instead of normal bolt - nut in cable - resistance connection
40mm ventilation gap on 4 surfaces (ensures easy heating and cooling of the oven, easy removal of gas and water vapor and long life of the metal parts)
With ventilation flap at the top and flap at the bottom (in proportion to the internal volume) -Heated from 5 directions (homogeneous heat distribution ensures that all products are exposed to the same temperature)

Control RF800 Programmer 
It is a digital with 3 programs and 10 sets in each program. It also shows date, time, program, step, set temperature, exit time, current temperature and remaining time.
Temperature measurement: K Type NiCr-Ni 25-1200°C single point with Nickel-Chromium thermocouple.
Self-reactivation system in case of power outages
Oven cooling system is free cooling.
Bottom valve system for fast cooling (under the shelf to prevent damage to the product inside)
2 Year Warranty + 10 Year Service Warranty
Certified to TSE and CE Standards