RS400 / RSH400 Chamber Kiln (R7210)

Product Features

Heating elements are installed on both sides and at the base and positioned on the Ceramic Tube. 

Long life of the heating elements is ensured as a result of adaptive wire calculations. 
Fast rhythmization of switching operations ensures precise heat flow. 
Double coated cover with low external temperatures. 
Lid contact switch with forced disconnection. 
Insulation of the furnace chamber with lightweight firebricks and special backside isolation for low electricity consumption
Complete Alumina Brick on 6 surfaces inside the furnace, absolutely no fiber containing carcinogenic materials is used inside the furnace.
Infinitely adjustable air supply and discharge for short cooling times. 
Air discharge place on the kiln
The kiln panel is enclosed at the back of the kiln.
 

Digital RF800/850/860 Programmer Features:
Automatic start on the desired day and time
Automatic self-activation during power outages
5 Programs + 15 steps in each program
To be able to review the reports of the last 8 moxibustions
Date, Time, Program in Use and Total Number of Steps, Current Step in Operation, Set Value of the Set Step, Time Set to that set value, Start / Stop Status, Current Temperature and Remaining Time until the end of the Program are displayed on the screen.

Note

The place where the kiln will be placed and the width required for installation must be set by you in advance.

Cables, fuses etc. that will be required for the electrical line are notified by our company, the place where the kiln will be installed and the electrical connections must be prepared up to the kiln and the panel before the oven delivery.
 

Transportation and Installation

Transportation will be done by the buyer. If it is desired to be provided by Refsan, it will be discussed mutually.

If the transportation will be organized by the customer, insurance is recommended.

The crane or forklift that will be needed during the unloading process will be provided by the buyer.