RS2A1.000 Kiln With Trolley (R11677)

Technical specifications

Industries Used in

Ceramics, Heat Treatment, Annealing, Ramat, Screen Printing, Gilding etc.
Internal dimensions: d110 x w90 x h100cm - 1000dm³ usable internal volume. (Different sizes can be requested) 
Power: 30 - 40 KW. (Depends on the sector used)
Max. Operating Temperature RS Model 1200 - RSH Model 1300ºC.
Voltage: 400 V.
Kiln type Chamber type, with trolley.
The trolley is movable on the rail, manually in and out of the kiln. (Uneven ground does not cause problems)
Insulation content: Alumina brick with 1430°C resistance, board plate with 1260°C resistance, X1000 Board with 1000°C resistance.
 

Note
Fiber is not used in the furnace. Compared to fiber furnaces; 3-4 times life span, provides great electricity savings.
Paint: Interior and exterior surfaces are completely rot resistant electrostatic powder coated (baked in a special kiln at 200ºC).
Heater : 1400ºC resistant, KANTHAL A1 resistance array.
Kiln floor level is at a suitable height from the floor for ease of operation.
Electrical control elements are Telemecanique and Siemens.
Control panel on the kiln and kiln electrical connections are protected.
40 mm ventilation gap on 4 surfaces (ensures easy heating and cooling of the kiln, easy removal of gas and water vapor and long life of the metal parts).
With ventilation cover on top (automatic opening and closing feature at the desired degree)
5 directional heating (homogeneous heat distribution ensures that all products reach the same temperature)
      

Control RF800 Digital Programmer
It shows the date, time, program, step, set temperature, time to leave, current temperature and remaining time at the top of the screen.
Automatic start at a later date and time
Automatically activates itself during power outages.
Gives a report of the last 8 burns at 2 minute intervals. You can see the entire burn.
5 programs and the ability to enter 15 sets in each program.
Automatic close and open top cover feature
Temperature measurement: K Type NiCr-Ni 25-1200ºC for RS Model, S Type Pt-Rd-Pt thermocouple with rear center single point for RSH Model.
Furnace cooling system is free cooling.
Automatically cuts off the electricity when the door is opened.
2 Year Warranty + 10 Year Service Warranty
CE Certified in accordance with European Standards
 

Accessories-Optional
To be used in the kiln;
Kiln shelf (400x500x15 mm) made of cordierite material and 1250ºC resistant.
Kiln shelf (400x500x12 mm) made of SiC material and 1400°C resistant 
Kiln Shelf Leg (Bracket) : 5cm long, round or square, 1250ºC resistant, interlocking shelf leg. 
Side + thermocouple

Optional Features
Geared trolley system (Cannot be used in double trolley system)