Ceramics, Heat Treatment, Ramat, Screen Printing, Gilding, etc
- Internal dimensions: d130 x g110 x h100cm - 1500dm3 available internal volume. (Different size can be requested)
- Power: 45 - 70 KW. (Depends on the industry used)
Max. The Operating Temperature is RS Model 1200 - RSH Model 1300ºC.
- Voltage: 400 V.
-Kiln type: Cabin type, with car.
- The car is moving on the rail, so as to manually enter and exit the furnace. (Broken floor does not cause problems)
-Insulation content: Alumina brick with a strength of 1430°C, board plate with a strength of 1260°C, X1000 Board with a strength of 1000°C.
NOTE
-Fiber is not used in the oven. Compared to fiber furnaces; 3-4 times the service life, it saves a lot of electricity.
-Paint: Internal and external surfaces are completely painted with electrostatic powder with resistance to rotting (heat treatment is applied at 200ºC.)
-Heater: 1400ºC resistance, KANTHAL A1 resistance array.
- The oven floor level is at the appropriate height from the floor for ease of operation.
-Electrical control elements Telemecanique and Siemens.
- The control panel and oven electrical connections on the kiln are protected.
-4 on the surface, a ventilation gap of 40 mm. (it ensures that the kiln heats up and cools down comfortably, the gas and water vapor that comes out is easily disposed of, and the metal assembly has a long service life)
- With ventilation cover on top (automatic opening and closing feature to the desired degree)
- heated from 5 directions. (ensures that all products reach the same temperature with uniform heat dissipation)
CONTROL RF800 DIGITAL PROGRAMMATOR
-At the top of the screen, it shows the date, time, program, step, set temperature, time to exit, current temperature and remaining time.
-Automatic start at the next date and time
-It automatically activates itself in case of power outages.
-It reports the last 8 Decimations at 2 minutes intervals. You can see the whole burn.
- Ability to enter 5 programs and 15 sets in each program.
-Auto-close the top cover - open feature
- Temperature measurement: K Type NiCr-Ni 25-1200ºC for RS Model Mo S Type Pt-Rd-Pt thermocouple for RSH Model Mo the rear middle single point with thermocouple.
-The kiln cooling system is a free cooling system.
- It automatically turns off the power when the cover is opened.
-2 Year Warranty + 10 Year Service Warranty
-Certified compliance with CE European Standards
ACCESSORIES- (OPTIONAL)
-It will be used in the furnace ;
- The kiln shelf (400x500x15 mm ) is made of cordierite material and has a resistance of 1250ºC.
-The kiln shelf (400x500x12 mm) is made of SiC material and has a resistance of 1400°C
-Kiln Shelf Foot (Support) : 5cm tall, round or square, 1250ºC strength, interlocking rack foot.
Sideways + termokupul
OPTIONAL FEATURES
-Gearmotor car system (Can not be used in dual-car system)