ADET
RD16/ RDH16 ANNEALING FURNACE
Product Features
As standard, it is of the bench top model type. Bottom leg part can be supplied as additional equipment. Heating elements are installed on both sides and positioned on Ceramic Pipe
Long lifetime of the heating elements is ensured as a result of adaptive wire calculations Silent operation of the heating system is ensured by solidstaterelais type relays Fast rhythmization of switchgear processes results in precise heat flow Double coated cover with low external temperatures Lid contact switch with forced disconnection Insulation of the oven chamber with lightweight firebricks and special backside isolation for low electricity consumption 6 surfaces inside the oven are completely Alumina Brick, there is absolutely no fiber containing carcinogenic materials inside the oven. Body sheets are made of precious and shaped steel sheet and painted with electrostatic paint Infinitely adjustable air supply and discharge for short cooling times
Digital RF800/850/860 Programmer Features: Automatic start on the desired day and time Automatic self-activation during power outages 5 Programs + 15 steps in each program To be able to review the reports of the last 8 moxibustions Date, Time, Program in Use and Total Number of Steps, Current Step in Operation, Set Value of the Set Step, Time Set to that set value, Start / Stop Status, Current Temperature and Remaining Time until the end of the Program are displayed on the screen.
Note
The place where the oven will be placed and the width required for installation must be set by you in advance.
Cables, fuses etc. that will be required for the electrical line are notified by our company, the place where the oven will be installed and the electrical connections must be prepared up to the oven and the panel before the oven delivery.
Transportation and Installation
Transportation will be done by the buyer. If it is desired to be provided by Refsan, it will be mutually negotiated.
If the transportation will be organized by the customer, insurance is recommended.
The crane or forklift that will be needed during the unloading process will be provided by the buyer.
If the unloading will be done with Refsan vehicle, there is no need for a forklift or crane to lower it down since there is a lift behind it.
Internet Explorer tarayıcısının 9.0 ve daha eski sürümlerini desteklememekteyiz. Web sitemizi doğru görüntüleyebilmek için tarayıcınızı güncelleyebilirsiniz, güncelleyemiyorsanız başka bir tarayıcıyı ücretsiz yükleyebilirsiniz.